1 1

VENTGUARD 4 PIECE

VENTGUARD 4 PIECE

$93.75
$93.75
Sale Sold out

GT Styling Ventgard-Sport window visors allow you to crack your windows for ventilation while keeping rain and wind out. These in-channel visors install flush with your vehicle's window trim for a clean, integrated appearance on trucks, SUVs, and sedans.

Injection-molded from 3mm thick smoke-tinted acrylic with UV-stabilized resins. The material is impact-resistant and retains flexibility in cold weather for secure fitment. Each visor is vehicle-specific in contour and cut. Surface finish is a subtle textured smoke that blends with most factory window trim.

In-channel installation using pre-applied 3M adhesive tape. Slide the visor into the window channel, align with the top edge, and press. No drilling or clips required. Roll windows down after 24 hours for full bond cure. The kit includes left and right front visors, pre-applied tape, cleaning prep pads, and instruction manual.

Enjoy fresh air even in the rain. Subtle styling with real function. Order your GT Styling Ventgard-Sport visors today.
View full details

Frequently Asked Questions

Will these GT Styling Ventgard 4-piece window visor set allow me to crack my windows in the rain

Yes, these GT Styling Ventgard 4-piece window visor set are precisely designed to allow you to crack your windows open during rainy weather without water dripping into your vehicle's interior. The visors create a sheltered channel above the window opening that deflects rain away while letting fresh air circulate through the cabin. This is especially useful for reducing window fogging in humid conditions and letting heat escape on warm days without running the air conditioner. The visors are made from impact-modified acrylic or smoke polycarbonate that resists UV fading and cracking. They install using 3M automotive-grade tape directly onto the

Will these GT Styling Ventgard 4-piece window visor set easy to install on my vehicle without drilling or

Yes, these GT Styling Ventgard 4-piece window visor set are designed for tool-free installation using pre-applied 3M automotive-grade acrylic foam tape that bonds directly to the window frame of your vehicle. The entire installation takes approximately 20 to 30 minutes and only requires cleaning the mounting surface with isopropyl alcohol using the included prep wipe. Each visor is vehicle-specific and pre-curved to match the exact window contour of your model for a precise fit. No drilling, screws, or clips are needed, and the visors can be removed cleanly without damaging your paint or trim. Allow the tape to cure for

Do these GT Styling Ventgard 4-piece window visor set reduce wind noise when driving on the highway with

These GT Styling Ventgard 4-piece window visor set are aerodynamically designed to reduce wind noise when your windows are closed by smoothing the airflow over the window channel. The visors sit flush against the window frame and deflect wind away from the gap between the window and the door frame, which reduces whistling sounds at highway speeds. When the windows are partially open, the visors actually help reduce interior buffeting and pressure fluctuations that cause ear discomfort. The smoke or dark acrylic finish blends with most factory trim colors for a clean integrated appearance. They also provide a mild reduction

Will these GT Styling Ventgard 4-piece window visor set fit my vehicle if I already have aftermarket window

Yes, these GT Styling Ventgard 4-piece window visor set can be installed on vehicles that already have aftermarket window tint because they mount on the exterior window frame trim, not the glass itself. The 3M tape bonds to the painted door panel or chrome trim surrounding the window, not the tinted glass surface. Make sure the mounting area is clean and free of wax or silicone before applying the visors for best adhesion. The tinted smoke color option matches well with tinted windows for a cohesive custom appearance. The visors do not interfere with window operation since they mount above

What is the difference between the standard Ventgard and the Bubble Ventgard smoked visors?

The main difference between standard Ventgard and Bubble Ventgard smoked visors is the shape and profile of the visor itself. Standard Ventgard visors have a smooth, low-profile curve that follows the window line closely for a subtle appearance. Bubble Ventgard visors feature a slightly taller, more pronounced bubble or raised profile that provides additional ventilation coverage and a more aggressive custom look. The smoked finish on the Bubble Ventgard models is darker and provides a more tinted appearance compared to standard smoke visors. Both types use the same no-drill 3M tape installation method and are made from UV-stabilized acrylic material.