1 1

Moroso 20546 Moroso Street/Strip Oil Pans

Moroso 20546 Moroso Street/Strip Oil Pans

$388.00
$388.00
Sale Sold out

The Moroso 20546 Moroso Street/Strip Oil Pans is a street/strip oil pan designed for increased capacity and improved oil control. Moroso pans use trap-door baffles that keep oil around the pickup during acceleration and braking. Part 32130 is configured for its specific application with attention to fitment requirements.

These pans are welded steel with a powder coat finish. Internal baffling includes hinged trap doors. The deep sump increases capacity. Includes drain plug. Product 32130 is verified for correct specifications and dimensional accuracy before shipment.

Oil control becomes critical as power levels increase. Moroso's baffling prevents oil starvation during hard acceleration and braking. SKU 632130 is backed by the manufacturer's quality guarantee and our satisfaction commitment. Application-specific fitment is verified before packaging and shipment. Quality control inspections are performed on each unit before shipment. This part is a verified replacement for the factory component.

Shop with confidence at GodsMods for quality automotive performance parts backed by expert product knowledge and reliable shipping.
View full details

Frequently Asked Questions

How much oil capacity does this performance oil pan add compared to the factory pan?

This performance oil pan increases capacity from the standard 5 quarts to 6 to 8 quarts, providing 20 to 40 percent more oil volume for improved cooling and starvation resistance. The extra capacity reduces oil temperature by 10 to 20 degrees Fahrenheit during sustained high-RPM operation. The pan is constructed from 16-gauge steel with welded internal baffles that control oil slosh during acceleration, braking, and cornering. A kick-out design on the passenger side adds 1.5 to 2.0 quarts while helping oil return to the pickup area. The deep sump extends 1.0 to 1.5 inches below the factory pan depth, requiring a matching Milodon pickup tube positioned 0.250 to 0.500 inches from the pan bottom.

Does this Milodon oil pan clear the steering linkage and crossmember on my classic car?

This Milodon street/strip oil pan is designed for specific clearance on most classic American vehicles from 1960 to 1980, with the rear sump positioned behind the crossmember. The pan provides 1.0 to 1.5 inches of clearance to the steering linkage at full lock and fits between factory frame rails 9.5 to 11.0 inches apart. A drain plug is positioned on the driver's side or rear section for easy oil changes without steering component interference. For vehicles with aftermarket steering racks or tubular crossmembers, verify fitment using the Milodon part number lookup by specific vehicle application. If aftermarket headers are installed, verify at least 0.25 inches of clearance between primary tubes and the oil pan surface at all points.

What maintenance is required to keep this 20546 Street/Strip Pans functioning properly over time?

Regular maintenance of this 20546 Street/Strip Pans involves periodic inspection every 10,000 to 15,000 miles for signs of wear, corrosion, or loosening of fasteners. Cleaning the component with appropriate solvents and reapplying anti-seize or thread locker where specified extends service life. Operating conditions such as frequent off-road use, salt exposure, or high-heat environments may require more frequent inspection intervals of 5,000 to 7,500 miles. Replace any worn gaskets or seals immediately to prevent leaks or contamination of surrounding components. Following the manufacturer's recommended maintenance schedule for this 20546 Street/Strip Pans ensures reliable performance for 50,000 to 100,000 miles of normal street use.

What tools are needed to install this 20546 Street/Strip Pans in my vehicle at home?

Installing this 20546 Street/Strip Pans at home requires basic automotive hand tools including a socket set, combination wrenches, screwdrivers, and a torque wrench capable of measuring 10 to 100 foot-pounds. A floor jack and jack stands are needed if installation requires wheel removal or under-vehicle access. Thread locker, anti-seize compound, and silicone sealant may be required depending on the specific application and installation environment. A repair manual or online guide for your specific vehicle provides torque specifications and removal procedures for surrounding components. Most DIY installations of this 20546 Street/Strip Pans take 1 to 4 hours depending on accessibility and experience level.

Does this 20546 Street/Strip Pans require any modifications to the vehicle for proper fitment and operation?

This 20546 Street/Strip Pans is designed for direct bolt-on installation in most compatible vehicles without requiring cutting, drilling, or permanent modifications. Some vehicles may require minor clearancing of adjacent components by 0.125 to 0.250 inches for proper clearance. Always perform a test fit before final assembly to verify the 20546 Street/Strip Pans clears all surrounding components including brackets, hoses, and wiring harnesses. If minor modifications are needed, use appropriate tools and techniques to maintain the structural integrity of surrounding components. The 20546 Street/Strip Pans is designed to be fully reversible, allowing the vehicle to return to stock configuration if the component is removed.