1 1

Moog Replacement Idler Arms

Moog Replacement Idler Arms

$72.25
$72.25
Sale Sold out

Moog replacement idler arms restore proper steering linkage geometry by replacing a worn idler arm with an OE-quality component. The idler arm supports the passenger-side end of the center link — when its pivot bushing wears, the center link drops, causing steering wander, loose feel, and accelerated tire wear on the right front tire. Restoring this critical pivot point transforms on-center feel.

Moog Problem Solver idler arms feature a hardened steel stud with a pre-installed, permanently lubricated bearing that eliminates the play found in worn factory components. The design addresses the common failure point with upgraded bushing materials and improved sealing that outlast OEM components by a wide margin. Greaseable where applicable.

Direct bolt-in replacement using factory mounting hardware. Includes mounting bolts and cotter pin. Sold individually. Moog recommends replacing both idler arms simultaneously for balanced steering feel side to side. Professional alignment recommended after replacement for best results.

Eliminate passenger-side steering slop. Moog idler arms restore precise center link support and steering accuracy. Order now.
View full details

Frequently Asked Questions

Does the Moog idler arm restore steering stability on my your vehicle?

Yes, the Moog idler arm for your your vehicle restores steering stability by eliminating the excessive play that develops as the idler arm bushings wear. A worn idler arm allows approximately 0.25 to 0.5 inches of unwanted steering wheel movement before the wheels respond. These Moog idler arms reduce steering slop and wandering on your your vehicle at highway speeds.

Will the Moog replacement idler arm fit the factory bracket on my your vehicle?

Yes, the Moog replacement idler arm bolts directly to your your vehicle's factory bracket on the frame rail using the original bolt pattern. The mounting points use 12mm or 14mm bolts depending on your your vehicle's specific application. These Moog idler arms match the factory geometry exactly for proper steering linkage alignment.

Does the Moog idler arm include the mounting bracket for my your vehicle?

The Moog idler arm for your your vehicle typically includes the arm assembly with pre-installed bushings and may or may not include the mounting bracket. Some applications include the frame bracket if the original bracket is welded to the frame and cannot be replaced separately. These Moog idler arms include the pivot stud and castle nut for complete installation.

Can I install the Moog idler arm without special tools on my your vehicle?

Yes, the Moog idler arm can be installed on your your vehicle with basic hand tools including sockets, wrenches, and a pry bar. The installation typically takes 30 to 60 minutes and requires disconnecting the center link from the idler arm. These Moog idler arms require a professional alignment afterward since the steering linkage geometry is disturbed.

How much does the Moog idler arm weigh for my your vehicle?

The Moog idler arm for your your vehicle weighs approximately 2.5 to 4.0 pounds depending on the application and whether the mounting bracket is included. The forged steel arm and cast bracket account for the bulk of the weight for structural rigidity. These Moog idler arms are designed to withstand the full steering load of your your vehicle.

How long does the Moog idler arm last on my your vehicle before replacement?

The Moog idler arm lasts approximately 40,000 to 60,000 miles on your your vehicle under normal driving conditions before developing steering play. Heavier vehicles and those frequently driven on rough roads will experience shorter service life due to increased loading. These Moog idler arms should be inspected during every alignment for signs of bushing wear.