1 1

Moog Chassis Parts DS1426 Moog Replacement Center Links

Moog Chassis Parts DS1426 Moog Replacement Center Links

$57.50
$57.50
Sale Sold out

The Moog DS1426 replacement center link restores proper steering geometry on vehicles where a worn center link has introduced slack in the steering linkage. The center link coordinates movement between the Pitman arm and both front wheels — any play here is amplified at the steering wheel, causing wandering and vague on-center feel.

Forged steel construction with hardened ball studs and pre-lubricated sockets. Moog’s engineering addresses common failure points with upgraded bushing materials and improved sealing to keep contaminants out. Direct replacement for the OEM part with all necessary hardware included. Grease fittings allow periodic maintenance to extend service life.

Bolt-in installation using standard hand tools. Sold individually. Professional alignment required after replacement. Moog recommends replacing the idler arm and tie rod ends at the same time for consistent steering feel across all linkage points.

Precise steering starts at the center link. Moog DS1426 eliminates linkage slop for accurate, direct steering. Order now.
View full details

Frequently Asked Questions

Does the Moog center link restore proper steering geometry on my your vehicle?

Yes, the Moog center link restores proper steering geometry on your your vehicle by replacing worn pivot points that cause loose steering feel. The center link connects the pitman arm to the idler arm and both tie rod ends for coordinated wheel movement. These Moog center links eliminate the 0.5 to 1.0 inches of dead steering travel common with worn linkage.

Will the Moog replacement center link fit my your vehicle's tie rod ends?

Yes, the Moog replacement center link is designed with the correct taper angle at the tie rod end mounting points for your your vehicle. The stud bores are tapered at approximately 1.5 inches per foot to match both inner and outer tie rod ends. These Moog center links use the same thread pitch as factory components for compatibility.

Do the Moog center links include the idler arm pivot for my your vehicle?

The Moog center links for your your vehicle include the idler arm pivot stud and bushing assembly as an integrated component in some designs. Other applications require the idler arm to be ordered separately and attached to the center link during installation. These Moog center links are pre-assembled with grease fittings at each pivot point for easy maintenance.

Can I install the Moog center link without removing the pitman arm on my your vehicle?

Yes, the Moog center link can typically be installed on your your vehicle by disconnecting the tie rod ends and idler arm without removing the pitman arm. The pitman arm connection requires a puller tool to separate the tapered stud from the steering box. These Moog center links require a complete front-end alignment after installation on your your vehicle.

How much does the Moog center link weigh for my your vehicle?

The Moog center link for your your vehicle weighs approximately 4.0 to 7.0 pounds depending on the length and material thickness. The steel rod measures approximately 0.75 to 1.0 inches in diameter with forged mounting ends at each pivot location. These Moog center links are designed to withstand steering loads without flexing on your your vehicle.

How long does the Moog center link typically last on my your vehicle?

The Moog center link lasts approximately 50,000 to 80,000 miles on your your vehicle under normal driving conditions before the pivot joints develop play. The pre-lubricated sealed joints resist contamination that accelerates wear in the pivot bushings. These Moog center links should be inspected during tire rotations for signs of wear in the pivot points.