1 1

KB HEMI 1.700 12PT SS OIL PAN

KB HEMI 1.700 12PT SS OIL PAN

$141.50
$141.50
Sale Sold out

The KB HEMI 1.700 12PT SS OIL PAN provides reliable oil pan fastening with a stud-and-nut system that prevents thread galling in the block and ensures consistent pan rail clamp load. This is especially important with deep-sump or aftermarket oil pans used in performance applications. Part 33250 is configured for its specific application with attention to fitment requirements.

ARP oil pan studs are machined from 8740 chromoly steel with hardened washers and 12-point nuts. The stud design eliminates cross-threading the pan rail holes and provides alignment during pan installation. Kits are application-specific for popular engine families. Product 33250 is verified for correct specifications and dimensional accuracy before shipment.

Oil pan leaks are one of the most common engine seal failures. The stud design lets the gasket position correctly before the pan is raised, preventing misalignment. Consistent clamp load from ARP fasteners maintains the seal through thermal cycling. SKU 933250 is backed by the manufacturer's quality guarantee and our satisfaction commitment.

Shop with confidence at GodsMods for quality automotive performance parts backed by expert product knowledge and reliable shipping.
View full details

Frequently Asked Questions

How much oil capacity does this performance oil pan add compared to the factory pan?

This performance oil pan increases capacity from the standard 5 quarts to 6 to 8 quarts, providing 20 to 40 percent more oil volume for improved cooling and starvation resistance. The extra capacity reduces oil temperature by 10 to 20 degrees Fahrenheit during sustained high-RPM operation. The pan is constructed from 16-gauge steel with welded internal baffles that control oil slosh during acceleration, braking, and cornering. A kick-out design on the passenger side adds 1.5 to 2.0 quarts while helping oil return to the pickup area. The deep sump extends 1.0 to 1.5 inches below the factory pan depth, requiring a matching Milodon pickup tube positioned 0.250 to 0.500 inches from the pan bottom.

Does this Milodon oil pan clear the steering linkage and crossmember on my classic car?

This Milodon street/strip oil pan is designed for specific clearance on most classic American vehicles from 1960 to 1980, with the rear sump positioned behind the crossmember. The pan provides 1.0 to 1.5 inches of clearance to the steering linkage at full lock and fits between factory frame rails 9.5 to 11.0 inches apart. A drain plug is positioned on the driver's side or rear section for easy oil changes without steering component interference. For vehicles with aftermarket steering racks or tubular crossmembers, verify fitment using the Milodon part number lookup by specific vehicle application. If aftermarket headers are installed, verify at least 0.25 inches of clearance between primary tubes and the oil pan surface at all points.

What maintenance is required to keep this HEMI 1.700 12PT functioning properly over time?

Regular maintenance of this HEMI 1.700 12PT involves periodic inspection every 10,000 to 15,000 miles for signs of wear, corrosion, or loosening of fasteners. Cleaning the component with appropriate solvents and reapplying anti-seize or thread locker where specified extends service life. Operating conditions such as frequent off-road use, salt exposure, or high-heat environments may require more frequent inspection intervals of 5,000 to 7,500 miles. Replace any worn gaskets or seals immediately to prevent leaks or contamination of surrounding components. Following the manufacturer's recommended maintenance schedule for this HEMI 1.700 12PT ensures reliable performance for 50,000 to 100,000 miles of normal street use.

What tools are needed to install this HEMI 1.700 12PT in my vehicle at home?

Installing this HEMI 1.700 12PT at home requires basic automotive hand tools including a socket set, combination wrenches, screwdrivers, and a torque wrench capable of measuring 10 to 100 foot-pounds. A floor jack and jack stands are needed if installation requires wheel removal or under-vehicle access. Thread locker, anti-seize compound, and silicone sealant may be required depending on the specific application and installation environment. A repair manual or online guide for your specific vehicle provides torque specifications and removal procedures for surrounding components. Most DIY installations of this HEMI 1.700 12PT take 1 to 4 hours depending on accessibility and experience level.

Does this HEMI 1.700 12PT require any modifications to the vehicle for proper fitment and operation?

This HEMI 1.700 12PT is designed for direct bolt-on installation in most compatible vehicles without requiring cutting, drilling, or permanent modifications. Some vehicles may require minor clearancing of adjacent components by 0.125 to 0.250 inches for proper clearance. Always perform a test fit before final assembly to verify the HEMI 1.700 12PT clears all surrounding components including brackets, hoses, and wiring harnesses. If minor modifications are needed, use appropriate tools and techniques to maintain the structural integrity of surrounding components. The HEMI 1.700 12PT is designed to be fully reversible, allowing the vehicle to return to stock configuration if the component is removed.