1 1

Hypertech Street Runner Power Chips

Hypertech Street Runner Power Chips

$115.50
$115.50
Sale Sold out

Hypertech's Hypertech Street Runner Power Chips delivers old-school ECU tuning that defined the aftermarket for decades. By swapping the factory EPROM in your ECM for this pre-programmed performance chip, you gain optimized fuel mapping, advanced timing, and refined transmission behavior. The Street Runner line covers a broad range of GM, Ford, Mopar, and import applications.

The Street Runner chip typically delivers 15-25 HP and 20-30 lb-ft of torque on most V6 and V8 applications. Calibration changes include richer WOT fuel mixtures, optimized spark advance curves, raised rev limiters where safe, and transmission tuning for firmer shifts. Each chip is programmed to the specific ECM calibration code of the target vehicle for drop-in compatibility.

This is a straightforward DIY install for anyone who can access their vehicle's ECU. Remove the ECU, open the case, and swap the factory EPROM for the Street Runner chip. No tuning software, no cables, no professional equipment needed. The original chip should be stored in an anti-static bag for future use if reverting to stock is desired.

If you want genuine EPROM-level tuning that doesn't require a programmer, laptop, or app, the Street Runner Power Chip delivers. Add Hypertech Street Runner Power Chips to your cart and start enjoying the benefits of Hypertech's calibration expertise.
View full details

Frequently Asked Questions

How much power will this Hypertech Street Runner power chip add to my engine?

The Hypertech Street Runner Power Chips is a replacement PROM chip that recalibrates your ECU with optimized fuel and timing curves for noticeable performance gains. You can expect anywhere from 10 to 25 additional horsepower and 15 to 30 lb-ft of torque depending on your specific engine and model year. The biggest improvements are typically seen in the mid-range RPM band where you do most of your everyday driving.

Can I install this Hypertech Street Runner power chip myself or take it to a shop?

Installing the Hypertech Street Runner Power Chips requires opening your vehicle's ECU case and carefully swapping the factory PROM chip with the new programmed one. You will need a small flathead screwdriver, a steady hand, and about 30 to 45 minutes of your time to complete the job. Detailed step-by-step instructions with diagrams are included with every chip to guide you through the process without any confusion.

Will this Hypertech Street Runner power chip be detectable during dealer service visits?

The Hypertech Street Runner Power Chips is a direct physical replacement for your factory ECU chip and is completely undetectable once the ECU case is closed back up. If you ever need to take your vehicle in for dealer service, you can simply reinstall your original factory chip in about 15 minutes. This makes it one of the most discreet and stealthy tuning options available for your vehicle today.

Does this Hypertech Street Runner power chip come for both gas and diesel engines?

The Hypertech Street Runner Power Chips is available for both gas and diesel engine applications, but each chip is programmed specifically for one fuel type and cannot be used interchangeably. Hypertech programs each ThermoMaster and Street Runner chip separately based on the vehicle's unique ECU calibration identification number. You must use our fitment lookup tool or contact us with your VIN to receive the correct chip for your engine.

Will this Hypertech Street Runner power chip help improve my fuel economy during daily driving?

Many drivers report gaining 1 to 3 MPG after installing the Hypertech Street Runner Power Chips, especially when driving conservatively on the highway. The optimized timing curves and air-fuel ratios promote more complete combustion, which means less wasted fuel during light throttle cruising conditions. Remember that frequently using full throttle to enjoy the extra power will offset any fuel economy gains you might otherwise achieve.

Will this Hypertech Street Runner power chip work on my stock truck without other mods?

The Hypertech Street Runner Power Chips is specifically designed for stock or near-stock vehicles and works perfectly with all factory engine components and emissions equipment. Hypertech calibrations stay well within safe operating limits for ignition timing, fuel delivery, and all other critical engine parameters. If you plan major modifications like forced induction or camshaft swaps later, a custom dyno tune would be more appropriate than this pre-programmed chip.