1 1

Hedman Hedders 65104 Hedman Street Headers | Atech Motorsports

Hedman Hedders 65104 Hedman Street Headers | Atech Motorsports

$346.00
$346.00
Sale Sold out

The Hedman Hedders 65104 Hedman Street Headers | Atech Motorsports are dyno-developed performance headers made from mandrel-bent mild steel tubing. They are a direct-fit replacement for factory exhaust manifolds, improving engine breathing by reducing exhaust restriction and improving cylinder scavenging. Part 86754 is configured for its specific application with attention to fitment requirements.

These headers have laser-cut flanges machined flat for accurate gasket sealing, mandrel-bent primary tubes that maintain consistent inside diameter through each bend, and include all mounting hardware and gaskets. Tube diameter and length are application-specific. Product 86754 is verified for correct specifications and dimensional accuracy before shipment.

Factory exhaust manifolds prioritize low cost and noise reduction over power. Hedman headers replace them with smooth-flowing primary tubes that reduce backpressure and improve scavenging. Expect a gain of 10-20 horsepower concentrated in the mid-to-upper RPM range. SKU 986754 is backed by the manufacturer's quality guarantee and our satisfaction commitment.

Shop with confidence at GodsMods for quality automotive performance parts backed by expert product knowledge and reliable shipping.
View full details

Frequently Asked Questions

What is the horsepower gain from installing these long tube headers on my engine?

Installing these long tube headers typically adds 15 to 25 horsepower on a naturally aspirated engine and 25 to 40 horsepower on a forced induction engine by reducing exhaust backpressure by 60 to 80 percent. The primary tube diameter is 1.5 to 1.75 inches with 16-gauge or 14-gauge steel wall thickness, and the collector size is 2.5 to 3.0 inches for optimal exhaust scavenging. For best results, pair these headers with a free-flowing exhaust system and cold air intake to gain 25 to 40 combined horsepower. The headers include provisions for oxygen sensor bungs and EGR connections so factory emissions equipment bolts directly in place. Header wrap or ceramic coating reduces underhood temperatures by 50 to 100 degrees Fahrenheit and protects the tubes from corrosion.

Will these full-length headers clear my vehicle's steering shaft and oil pan?

These full-length headers are engineered with vehicle-specific clearances for the steering shaft, oil pan, starter, and frame rails on their intended applications. The primary tubes are computer-designed to snake around the steering shaft with 0.5 to 1.0 inches of clearance at the tightest point. Installation typically takes 4 to 8 hours and requires basic hand tools, jack stands, and penetrating oil for stubborn manifold bolts. Some vehicles require unbolting the motor mounts and lifting the engine 1 to 2 inches for clearance on the driver's side header. The included header gaskets should be torqued to 15 to 20 foot-pounds in a crisscross pattern starting from the center bolts. After installation, verify at least 0.25 inches of clearance between the header tubes and all steering, braking, and suspension components at full suspension travel.

Do these stainless steel headers include the gaskets and bolts needed for installation?

These stainless steel headers include high-quality multi-layer steel or composite header gaskets rated for continuous exhaust temperatures up to 2,000 degrees Fahrenheit. The included bolts are grade 8 or stainless steel with an integrated thread-locking patch that prevents loosening from thermal expansion and vibration. The collector bolts and gaskets for connecting to the existing exhaust system are also included in this kit. Apply anti-seize compound to the header bolts and torque them to the manufacturer's specification of 15 to 20 foot-pounds. The header bolts require retightening after three to five heat cycles as the gaskets compress and seat fully during the initial 500 miles of driving.

What tools are needed to install this 65104 Street Headers in my vehicle at home?

Installing this 65104 Street Headers at home requires basic automotive hand tools including a socket set, combination wrenches, screwdrivers, and a torque wrench capable of measuring 10 to 100 foot-pounds. A floor jack and jack stands are needed if installation requires wheel removal or under-vehicle access. Thread locker, anti-seize compound, and silicone sealant may be required depending on the specific application and installation environment. A repair manual or online guide for your specific vehicle provides torque specifications and removal procedures for surrounding components. Most DIY installations of this 65104 Street Headers take 1 to 4 hours depending on accessibility and experience level.

Does this 65104 Street Headers require any modifications to the vehicle for proper fitment and operation?

This 65104 Street Headers is designed for direct bolt-on installation in most compatible vehicles without requiring cutting, drilling, or permanent modifications. Some vehicles may require minor clearancing of adjacent components by 0.125 to 0.250 inches for proper clearance. Always perform a test fit before final assembly to verify the 65104 Street Headers clears all surrounding components including brackets, hoses, and wiring harnesses. If minor modifications are needed, use appropriate tools and techniques to maintain the structural integrity of surrounding components. The 65104 Street Headers is designed to be fully reversible, allowing the vehicle to return to stock configuration if the component is removed.