1 1

COMP Cams 859-2 COMP Cams Endure-X Roller Lifters

COMP Cams 859-2 COMP Cams Endure-X Roller Lifters

$121.69
$121.69
Sale Sold out

The COMP Cams 859-2 COMP Cams Endure-X Roller Lifters are precision lifters from COMP Cams, engineered to follow the camshaft lobe profile accurately at all engine speeds. Lifters are a critical component in the valvetrain that directly affects valve timing, lift, and overall engine performance. Part 25410 is configured for its specific application with attention to fitment requirements.

COMP Cams lifters are manufactured to tight tolerances with precision-ground bodies and hardened faces. Hydraulic lifters feature properly calibrated internal valving for consistent lash adjustment throughout the temperature range. Solid lifters are designed for applications requiring mechanical adjustment of valve lash. Product 25410 is verified for correct specifications and dimensional accuracy before shipment.

Lifter selection must match the camshaft profile and intended operating range. COMP Cams lifters are engineered for compatibility with their camshaft profiles for consistent valvetrain operation. Proper lifter preload or lash adjustment is essential for achieving the advertised cam performance and ensuring long component life. SKU 825410 is backed by the manufacturer's quality guarantee and our satisfaction commitment.

Shop with confidence at GodsMods for quality automotive performance parts backed by expert product knowledge and reliable shipping.
View full details

Frequently Asked Questions

How do I properly break in these hydraulic lifters with my new camshaft installation?

Breaking in these hydraulic lifters requires running the engine at 2,000 to 2,500 RPM for 20 to 30 minutes continuously without allowing the engine to idle. Vary the RPM within that 2,000 to 2,500 RPM range every 30 to 60 seconds to ensure proper oil splash on the camshaft lobes and lifter faces. Use a break-in oil with high zinc content of 1,200 to 1,600 PPM ZDDP to protect the flat tappet lifters and camshaft lobes during the initial wear-in period. Before starting, prime the oil system using a drill-powered priming tool until oil flows steadily from each pushrod hole. Apply a generous coating of camshaft break-in lube to each lifter face and camshaft lobe during assembly, as the first 30 seconds of startup have zero oil pressure.

What is the correct valve lash adjustment for these hydraulic lifters in a V8 engine?

For these hydraulic lifters, set the valve lash to zero lash plus one-half to one full turn of preload after the pushrod no longer spins freely between your fingers. The correct preload is 0.020 to 0.060 inches of plunger travel, which ensures the lifter maintains oil pressure without bottoming out internally. Adjust the rocker arms with the engine cold and the piston on the compression stroke for each cylinder, following the firing order. For a standard small-block Chevrolet with 1.5 ratio rocker arms, zero lash plus 0.5 turns provides approximately 0.030 inches of lifter preload. After the initial startup and 20-minute break-in, recheck and readjust all valves with the engine hot and running at idle to verify consistent preload across all 16 lifters.

What maintenance is required to keep this Endure-X Roller Lifters functioning properly over time?

Regular maintenance of this Endure-X Roller Lifters involves periodic inspection every 10,000 to 15,000 miles for signs of wear, corrosion, or loosening of fasteners. Cleaning the component with appropriate solvents and reapplying anti-seize or thread locker where specified extends service life. Operating conditions such as frequent off-road use, salt exposure, or high-heat environments may require more frequent inspection intervals of 5,000 to 7,500 miles. Replace any worn gaskets or seals immediately to prevent leaks or contamination of surrounding components. Following the manufacturer's recommended maintenance schedule for this Endure-X Roller Lifters ensures reliable performance for 50,000 to 100,000 miles of normal street use.

What tools are needed to install this Endure-X Roller Lifters in my vehicle at home?

Installing this Endure-X Roller Lifters at home requires basic automotive hand tools including a socket set, combination wrenches, screwdrivers, and a torque wrench capable of measuring 10 to 100 foot-pounds. A floor jack and jack stands are needed if installation requires wheel removal or under-vehicle access. Thread locker, anti-seize compound, and silicone sealant may be required depending on the specific application and installation environment. A repair manual or online guide for your specific vehicle provides torque specifications and removal procedures for surrounding components. Most DIY installations of this Endure-X Roller Lifters take 1 to 4 hours depending on accessibility and experience level.

Does this Endure-X Roller Lifters require any modifications to the vehicle for proper fitment and operation?

This Endure-X Roller Lifters is designed for direct bolt-on installation in most compatible vehicles without requiring cutting, drilling, or permanent modifications. Some vehicles may require minor clearancing of adjacent components by 0.125 to 0.250 inches for proper clearance. Always perform a test fit before final assembly to verify the Endure-X Roller Lifters clears all surrounding components including brackets, hoses, and wiring harnesses. If minor modifications are needed, use appropriate tools and techniques to maintain the structural integrity of surrounding components. The Endure-X Roller Lifters is designed to be fully reversible, allowing the vehicle to return to stock configuration if the component is removed.