1 1

COMP Cams 7695-16 COMP Cams Magnum Pushrods

COMP Cams 7695-16 COMP Cams Magnum Pushrods

$135.45
$135.45
Sale Sold out

The COMP Cams 7695-16 COMP Cams Magnum Pushrods are precision pushrods from COMP Cams, engineered for consistent valve train geometry at high RPM. These pushrods transfer motion from the lifter to the rocker arm with minimal deflection, maintaining accurate valve timing and lift throughout the operating range. Part 25858 is configured for its specific application with attention to fitment requirements.

COMP Cams Magnum pushrods are manufactured from high-strength chromoly steel or 4130 alloy with hardened ends for durability. The specific length is matched to the valvetrain configuration for each application. Wall thickness is selected for the application's RPM range and spring pressure requirements. Product 25858 is verified for correct specifications and dimensional accuracy before shipment.

Pushrod flex at high RPM reduces effective valve lift and alters timing events. COMP Cams pushrods provide the stiffness needed for aggressive cam profiles and high spring pressures. Correct pushrod length is critical for proper rocker arm geometry and consistent valve operation at elevated RPM. SKU 225858 is backed by the manufacturer's quality guarantee and our satisfaction commitment.

Shop with confidence at GodsMods for quality automotive performance parts backed by expert product knowledge and reliable shipping.
View full details

Frequently Asked Questions

How do I determine the correct pushrod length for my camshaft and cylinder head combination?

To find the correct pushrod length, use an adjustable pushrod length checker on the number one cylinder intake valve with the rocker arm at zero lash. Count the turns on the checker tool to determine the length to the nearest 0.050 inches. The correct length achieves a rocker arm tip contact pattern centered on the valve stem tip, typically 1.5 to 2.0 millimeters wide. These COMP Cams Magnum pushrods range from 7.200 to 7.800 inches depending on your specific camshaft base circle, cylinder head height, and deck clearance. Order pushrods in 0.050-inch increments and verify the rocker arm geometry using a permanent marker pattern before final assembly. The one-piece 4130 chromoly construction handles valve spring pressures up to 450 pounds open and RPM levels to 7,000 RPM.

Are these one-piece chromoly pushrods stronger than factory two-piece welded pushrods?

Yes, these one-piece chromoly pushrods are significantly stronger than factory two-piece welded pushrods because they are constructed from a single piece of 4130 chromoly steel without a weld joint that can fail under high-RPM valvetrain loads. These pushrods are through-hardened to Rockwell 48 to 52 on the C-scale with a wall thickness of 0.058 to 0.083 inches. Factory welded pushrods are only rated for engines with redlines under 5,500 RPM and valve spring pressures under 250 pounds open. These pushrods handle spring pressures up to 450 pounds open and RPM levels to 7,000 RPM safely. The one-piece construction also provides more consistent length precision within 0.005 inches across all 16 pushrods in the set.

What maintenance is required to keep this Cams Magnum Pushrods functioning properly over time?

Regular maintenance of this Cams Magnum Pushrods involves periodic inspection every 10,000 to 15,000 miles for signs of wear, corrosion, or loosening of fasteners. Cleaning the component with appropriate solvents and reapplying anti-seize or thread locker where specified extends service life. Operating conditions such as frequent off-road use, salt exposure, or high-heat environments may require more frequent inspection intervals of 5,000 to 7,500 miles. Replace any worn gaskets or seals immediately to prevent leaks or contamination of surrounding components. Following the manufacturer's recommended maintenance schedule for this Cams Magnum Pushrods ensures reliable performance for 50,000 to 100,000 miles of normal street use.

What tools are needed to install this Cams Magnum Pushrods in my vehicle at home?

Installing this Cams Magnum Pushrods at home requires basic automotive hand tools including a socket set, combination wrenches, screwdrivers, and a torque wrench capable of measuring 10 to 100 foot-pounds. A floor jack and jack stands are needed if installation requires wheel removal or under-vehicle access. Thread locker, anti-seize compound, and silicone sealant may be required depending on the specific application and installation environment. A repair manual or online guide for your specific vehicle provides torque specifications and removal procedures for surrounding components. Most DIY installations of this Cams Magnum Pushrods take 1 to 4 hours depending on accessibility and experience level.

Does this Cams Magnum Pushrods require any modifications to the vehicle for proper fitment and operation?

This Cams Magnum Pushrods is designed for direct bolt-on installation in most compatible vehicles without requiring cutting, drilling, or permanent modifications. Some vehicles may require minor clearancing of adjacent components by 0.125 to 0.250 inches for proper clearance. Always perform a test fit before final assembly to verify the Cams Magnum Pushrods clears all surrounding components including brackets, hoses, and wiring harnesses. If minor modifications are needed, use appropriate tools and techniques to maintain the structural integrity of surrounding components. The Cams Magnum Pushrods is designed to be fully reversible, allowing the vehicle to return to stock configuration if the component is removed.