1 1

COMP Cams 213 COMP Cams Replacement Timing Cover Hardware Kits

COMP Cams 213 COMP Cams Replacement Timing Cover Hardware Kits

$224.17
$224.17
Sale Sold out

The COMP Cams 213 COMP Cams Replacement Timing Cover Hardware Kits is a complete hardware kit containing all the fasteners needed for engine assembly. Using the correct bolts in every location ensures proper clamp load, prevents fastener fatigue, and eliminates the risk of leaks or component loosening under vibration.

This kit includes all timing cover and timing set fasteners, washers, and any specialized hardware required for your specific application. The fasteners are manufactured from high-strength alloy steel with rolled threads for fatigue resistance. Each bolt is precision-machined to the correct length and thread pitch for each specific mounting location. The kit includes sealant recommendations for bolt threads that penetrate oil galleys or water jackets. All necessary hardware is included in one convenient package for a complete installation.

Oil leaks at the timing cover are one of the most common post-rebuild complaints, often caused by reusing old or incorrect fasteners. A fresh hardware kit eliminates that variable. Combined with a quality timing cover gasket and the correct torque sequence, this kit ensures a leak-free seal for the life of the engine. The included bolts are properly graded and plated for corrosion resistance.

Add COMP Cams 213 COMP Cams Replacement Timing Cover Hardware Kits to your engine gasket and hardware order today.
View full details

Frequently Asked Questions

What kind of engine component does Atech Motorsports offer for my engine build?

COMP Cams Replacement Timing from Atech Motorsports delivers reliable performance for street and strip applications. Precision-machined from premium-grade materials, it ensures consistent tolerances within 0.001 inch for optimal engine alignment. This engine component supports RPM ranges from idle up to 6,500 and is compatible with most small and big block platforms. Always verify your specific engine bore and stroke before ordering to guarantee proper fitment.

How does this engine component improve performance in a high-mileage engine?

Installing COMP Cams Replacement Timing reduces internal friction and restores factory clearances in worn engine builds. The precision-ground surfaces maintain oil control across a 20 to 60 PSI operating range at normal operating temperatures. For high-mileage engines, this engine component can recover up to 5 to 8 percent lost horsepower by stabilizing rotating assembly tolerances. Pair it with a quality oil pump and fresh gaskets for best results at 180 to 210 degrees Fahrenheit.

Can I install this engine component with basic hand tools in my garage?

Installing COMP Cams Replacement Timing is achievable with standard tools, though precise torque specs and a service manual are essential. You will need a beam-style torque wrench accurate to within 2 foot-pounds, along with assembly lube rated for break-in periods up to 30 minutes at 2,000 RPM. This engine component requires no special machining or line-boring in most applications. Allow 3 to 5 hours for a complete installation on a standard V8 engine platform.

Does this engine component work with aftermarket cylinder heads and intake manifolds?

COMP Cams Replacement Timing is engineered to interface seamlessly with most aftermarket cylinder heads and intake manifolds from brands like Edelbrock, AFR, and Dart. It accommodates valve lift up to 0.600 inches and spring pressures from 110 to 150 pounds on the seat. This engine component maintains proper geometry with stud-mounted rocker arms and guide plates up to 3/8-inch diameter. Confirm your pushrod length if using fully ported cylinder heads with deck resurfacing.

What maintenance schedule does this engine component require under daily driving?

Under normal daily driving, this engine component requires inspection every 12,000 miles with the first check at 500 miles after initial installation. The hardened steel surfaces resist wear through 150,000 miles of standard operation when paired with conventional 10W-30 oil at 40 to 60 PSI. Retorque all fasteners to factory specifications at the first oil change interval. Avoid extended periods above 6,500 RPM to maximize service life beyond 100,000 miles.

Will this engine component add horsepower to a naturally aspirated small block?

Yes, this engine component can contribute 5 to 15 horsepower to a naturally aspirated 350 cubic inch small block depending on supporting modifications. The optimized design reduces parasitic drag by up to 8 percent compared to stock components at peak torque around 4,000 RPM. It works best when combined with a matched camshaft profile offering 0.480 to 0.520 inches of lift and 270 to 290 degrees of advertised duration. Expect the most gain in the 2,500 to 5,500 RPM power band where most street engines live.