1 8

aFe Pro Series Transmission Pans for 1984 F-150, 1983-1992 F-250, 1990-1992 F-350 - 46-70212

aFe Pro Series Transmission Pans for 1984 F-150, 1983-1992 F-250, 1990-1992 F-350 - 46-70212

$355.00
$355.00
Sale Sold out

The aFe Pro Series Deep Transmission Pan (46-70212) is a direct-fit upgrade for Ford F-Series trucks running E4OD or 4R100 transmissions, covering the 1984 F-150, 1983–1992 F-250, and 1990–1992 F-350. If you're running a 7.3L IDI or a built 460 big-block, heat is the number one killer of your automatic—and this pan is your first line of defense.

Built from cast aluminum with reinforced internal and external cooling fins, the 46-70212 increases fluid capacity by roughly 2 quarts versus the factory stamped steel pan. That extra volume combined with finned surface area drops sump temperatures by up to 25°F under load. A neodymium magnetic drain plug catches clutch and band wear debris, while the threaded 1/8-inch NPT port accommodates an aftermarket temperature sensor for real-time monitoring.

Lower transmission temperatures mean less fluid oxidation, reduced varnish buildup, and longer clutch-pack life. This pan bolts on with all necessary hardware included and clears most aftermarket exhaust and crossmember configurations. Backed by aFe's signature textured powdercoat with machined fin accents, it looks as tough as it performs.

Give your E4OD/4R100 the cooling headroom it needs to survive heavy towing and high-horsepower builds. Add the aFe Pro Series pan to your cart now.
View full details

Frequently Asked Questions

How much extra fluid does this aFe Pro Series deep transmission pan hold compared to stock?

The aFe Pro Series deep transmission pan increases fluid capacity by approximately 1 to 2 quarts over the factory pan, depending on the specific vehicle application. This extra capacity helps keep the automatic transmission fluid cooler by allowing more oil to circulate and shed heat through the pan's internal and external cooling fins. The pan is constructed from durable cast aluminum with reinforced ribs and a black powdercoat finish with machined fin accents for protection and styling.

What transmission models does this aFe Pro Series deep pan fit for F-150 and F-Series trucks?

This aFe Pro Series transmission pan fits 1984 F-150, 1983 through 1992 F-250, and 1990 through 1992 F-350 trucks equipped with compatible automatic transmissions. It is designed as a direct bolt-on replacement for the factory pan using the existing gasket and bolt pattern, though some applications may require a different filter or pickup tube due to the deeper profile. Always confirm your transmission model and pan rail shape before purchasing to guarantee a proper seal.

Does the aFe Pro Series pan help lower transmission temperatures during towing?

Yes, the aFe Pro Series deep transmission pan is specifically engineered to reduce fluid temperatures during heavy towing and stop-and-go driving by increasing both fluid capacity and heat-shedding surface area. The internal and external fins transfer heat from the hot transmission fluid to the ambient air, which can lower operating temperatures by 10 to 20 degrees Fahrenheit compared to a stock pan. This temperature reduction helps extend the life of seals, clutches, and the valve body in high-stress conditions.

What material and finish does the aFe Pro Series transmission pan use?

This aFe Pro Series transmission pan is made from cast aluminum with reinforced ribs for maximum structural strength, preventing warpage even under extreme heat cycles. The finish is a durable black powdercoat that resists chipping and corrosion, with machined fins that expose the raw aluminum for a two-tone accent look. The combination of cast aluminum construction and powdercoat protection makes this pan suitable for daily-driven trucks that also see off-road or towing duty.

Can I install this aFe Pro Series transmission pan without modifying my transmission?

In most cases, the aFe Pro Series transmission pan bolts directly to the transmission case using the factory bolt pattern and a reuseable or replacement gasket, requiring no drilling or modifications. However, because this is a deeper pan than stock, you may need a longer filter pickup tube or an extension to ensure the filter sits at the correct depth in the fluid. Check the included instructions and any vehicle-specific notes from aFe before installation to confirm all needed components.

Will this transmission pan work with aftermarket transmission coolers on my F-Series truck?

Yes, this aFe Pro Series deep transmission pan works alongside an auxiliary transmission cooler to provide maximum thermal management for your F-150, F-250, or F-350. The increased fluid capacity gives the system more thermal mass, so the combination of a deeper pan and an external cooler can reduce peak fluid temperatures by 20 to 30 degrees during extended towing. Just ensure your cooler lines and fittings are compatible with the pan's ports or that you use the factory cooling line routing.